Vertere Acoustics Redline Analogue Tonearm Cable

Redline is a high-performance analogue tonearm cable by Vertere Acoustics, part of their Redline Range, following the design principles of the superior Pulse-R version, preserving the essence of the analogue signal.

As with the Pulse-R, Redline Analogue Tonearm Cables allow the miniature cartridge generator to drive the phono input comfortably. The internal conductor configuration of Redline is optimised for conducting the delicate phono signal with its substantial RIAA equalisation.

This provides the low frequencies, recorded at attenuated levels, and the much higher-level high frequencies, with an equal drive. Thus elevating the performance achieved with the Redline tonearm cable as close as possible to the formidable Pulse-R.

The Redline Range

Vertere Redline cable system is derived from their Pulse-R range and follows the same design principles, aiming to preserve the essence of the analogue audio signal. Redline cable is double-shielded with x7 independent conductors per-channel, facilitating different configurations to ensure optimum musical performance, clarity and life-like dynamics for both tonearm and stereo interconnect cables. Redline analogue cable connectors are all bespoke, and all contacts are specially gold plated to x3 standard thickness.

Specifications

• Range: Redline
• Type: Tonearm Cable
• Termination and Length: 5pin 90°, RCA, XLR with Ground Wire 1.15m (Additional lengths in 0.5m steps)
• Cable Type: 7x Conductors Vertere Pulse Multi Type, 3x Ground, 2x Signal (Hot), 2x Signal (Return)
• Conductor: High Purity Copper
• Plating: Silver, Tin
• Insulation: FEP, Special PVC
• Shield: Main Braid + Inner Special Wrap
• Size: 4.8mm x 10mm

More Information

• https://www.vertereacoustics.com/redline-tonearm-cable